Popp-O-Mat

August 29, 2006

Sexy blonde girl Elizabeth takes off her bikini

Filed under: Girls — admin @ 22:44
Elizabeth wears a dark bikini; that’s no problem, because she has the perfect body for that! In the members area you’ll find 29 high resolution photos of how Elizabeth takes off her nice bikini and shows her beautiful, perfect, naked body. Because she likes to do sports, she poses with some equipment like underwater glasses and fins.

Elizabeth 1 Elizabeth 2

Join now to see all photos instantly.

First Popp-O-Mat prototype is ready and working!

Filed under: Popp-O-Mat — admin @ 22:29
Our prototyping team is pleased to introduce the Popp-O-Mat prototype!

Prototype front view

Prototype connectors for electrodes

This great electronic device is very easy to use. The two (red and black) connectors on the top are for connectig the electrodes to the human body. After powering up the Popp-O-Mat by switching on the ON/OFF switch, it generates electrical pulses on the electrodes.

The two blue indicator LED’s show that the Popp-O-Mat is working.

August 23, 2006

Black haired teen Brigitte gets naked and puts in a vibrator

Filed under: Girls — admin @ 23:45
If teen Brigitte is alone at home, she sometimes takes her clothes off and has some fun with her yellow vibrator. You’ll find 107 very hot photos of Brigitte in the members area. If you don’t have access to it already, just sign up on this page and get it immediately.

Brigitte 1 Brigitte 2

Join now to see all photos instantly.

Parts for the Popp-O-Mat prototype complete

Filed under: Popp-O-Mat — admin @ 23:28
All parts for the prototype are here now.

Prototype all parts

The microcontroller board was programmed in the software laboratory with the initial firmware version 1.0. The assembly will be started immediately.

These are the main steps for assembling the Popp-O-Mat prototype:

  1. Drill the holes into the enclosure for the ON/OFF switch, indicator LED’s and connectors for the human body electrodes
  2. Wire up the battery connector with the ON/OFF switch and ground of the microcontroller
  3. Wire up the LED’s, connectors and microcontroller board
  4. Install the electronics into the enclosure
  5. Assemble the enclosure together

This process takes about one hour for our professional team in the prototyping department.

August 20, 2006

Teen Heidi gets naked and plays with a vibrator after doing homework

Filed under: Girls — admin @ 12:53
After doing homework, blonde Heidi loves to do a good thing and has a lot of fun with a vibrator. She has beautiful long hair and nice tits. You can find 103 high quality photos in the members area.

Heidi 1  Heidi 2

Join now to see all photos instantly.

August 18, 2006

Parts for the Popp-O-Mat prototype almost ready

Filed under: Popp-O-Mat — admin @ 09:39
The assembling of the parts for the first prototype can be started soon. It consists of these parts:

Poppomat Prototype Parts

  • Enclosure
  • Microcontroller Board
  • Indicator LED’s
  • Battery Connector

Following parts are missing at the moment:

  • ON/OFF Switch
  • Jack for connecting the electrodes
  • Resistors for the LED’s
 

August 17, 2006

Becky takes off her bikini at a pool

Filed under: Girls — admin @ 23:47
New photoset with teen Becky at a pool. She takes off her black bikini and jumps naked into the cold water. The photos are available now in the members area. You’ll find 86 photos in this great set. Some sample photos are available on the free gallery.

Becky Pool 1  Becky Pool 3

Join now to see all photos instantly.

August 11, 2006

Welcome to the world of Popp-O-Mat, the amazing sex enhancer device!

Filed under: Popp-O-Mat — admin @ 11:11
On this site you can find informations regarding this great electronic device and many photos of beautiful girls.